Olympus CAMERA HOUSING FL-50 Manual do Utilizador

8/6/2006 1 Camera Housing – Model FL-50 (Olympus) User Manual Contents: 1. Introduction 2. Specifications 3. Function Control

8/6/2006 10 7. Warranty The warranty is valid within two years from the date of first purchase. The warranty applies only to the housing itself. 10

8/6/2006 11 (Copy to be returned to 10 Bar Underwater Housings) The warranty is valid within two years from the date of first purchase. The warrant

8/6/2006 2 1. Introduction 10 BAR Underwater Housings are small, light and rugged enough to be used on every dive. Use of a clear polycarbonate

8/6/2006 3 3. Function Controls FL-50 4. Set up Instructions 4.1 Air Lock: The body and lid are designed with the Air Lock system “no clip”

8/6/2006 4 4.3 Opening levers: After unscrewing and pulling out the pressure release plug, the lid can be opened. To overcome the friction of openin

8/6/2006 5 4.5 Maintaining the O-ring Seal: If the main body to lid O-ring is not installed, install the O-ring before diving. This is the only use

8/6/2006 6 ring can be obtained from 10 BAR. If the O-ring is contaminated or suspected of being contaminated, clean it with a cotton cloth that is fr

8/6/2006 7 (Fig. 7) Screw home the pressure release plug (Fig. 7). There is no need to excessively tighten this plug. The seal is made by i

8/6/2006 8 5. Use & Care of Housing: 5.1 Pre Dive Function Check. Just before entering the water, make a habit of reviewing that you have car

8/6/2006 9 It is good practice to rinse off your housing with fresh water after every dive. Avoid exposure to fine sand. After a series of 10 or more